3D Printable Vectrex Cartridge Notes:

*#* Specifications from Hong Kong made
    "Rip Off" cartridge.

 <--------------------->
	  Width

 -----------------------  ^
|			| |
|	O	O	| |
|	|	|	| |
|	 (Main Comp)	| |
|			| | Height
|    O      ()     O    | |
|			| |
|-----------------------| |
|	(Slot Cover)	| |
 -----------------------  V

Screw Inset: ~2mm

Overall External:
^^^^^^^^^^^^^^^^^
Width: 74mm
Height: 72mm (should be 71mm?)
Depth: 12mm-Top 10mm-Bot
Wall Thick: 2mm

Main Comp (Internal):
^^^^^^^^^^^^^^^^^^^^^
Width: 70mm
Height: 55mm
depth: 10mm-top 7mm-bot

Slot Cover (Internal):
^^^^^^^^^^^^^^^^^^^^^^
Width: 70mm
Height: 14mm
Depth: 10mm-top 7mm-bot

Bot Pins:
^^^^^^^^^
Board Height (to board bot): 9mm
Rest Pin Height (board top): 11mm
Board Stoppers: 11mm

(measurements to middle of hole)
Upper Pair: 23mm from side, 13mm from top, 4mm outer diam, 7mm offshoots - 1mm wide
	    2mm notch length - 3.5mm drop, 13mm sideways from screw
Lower Supporting: 17 from side, 49mm from top, 4mm outer diam, 20mm from screw
		  0.4mm lip
Screw Hole: 37mm from side, 50.2mm from top - ledge 6mm dia, hole 2mm diam at end,
	    Hole 3mm diam in hole

Top Pins:
^^^^^^^^^
Same height as Top Lip: 7mm

Upper Pair: 13mm from side, 20mm from top, 4mm diam, 34mm from lip, 20mm sideways
	    from screw
Screw Hole: 35mm from side, 48mm from top, 5mm diam, 2mm diam hole, 7mm from lip

Lip:
^^^^
Bot: 11mm
Bot Dip: 2mm
Bot Dip Width: 49mm
Top: 7mm
Diam: 1mm

Top Side Dips:
^^^^^^^^^^^^^^
Inwards: 2.3mm
Across: 28mm
Down: 5.9mm

*Screw Sticks into top screw hole ~4mm
*Note on Pro/Desktop:
 To delete sketches, make sure all features are deleted from recycle bin at bottom of
 features pane.
-------
Errors:
^^^^^^^
*Slot Cover 4mm too long (from 75mm to 71mm (don't ask me why 72mm is at the top))
*Case Locators not perfectly printed (too big)

--------------------
Big Board Changes:
^^^^^^^^^^^^^^^^^^
    O <- Left Upper Support
   /|\
  O  () <- Screw Hole
 /\
 |
 Left Lower Support

Dist. "/"= 31mm
Dist. "\"= 32.5mm
Dist. "|" (sticky out bit) = 2mm